Chevy Truck Ignition Switch Problems [Explanation & Fix]

The Chevy Silverado is undoubtedly one of the best trucks available in the market. However, they still show some problems. Among them, one of the notable chevy truck ignition switch problems.

Certain ignition switches related issues include stalling on the road, lack of power to other accessories, etc. These issues are seen the most in the models yearing from 2004 to 2007. Don’t worry! These issues are normal to happen and are fixable. 

In this article, we will go through the symptoms that could indicate the problem, what sort of problems are there and how to fix them. After reading this article, you will have an overall understanding of the ignition switch problems.

What causes Chevy Truck Ignition Problems?

Ignition Switch is an electronic device that helps to kickstart the engine of the car. Therefore it is pretty important for the car’s overall mechanism. Ignition switch also sends power to the engine controls and the ignition controls. 

Issues regarding the ignition switches can arrive due to several factors. They range from faulty wires to corrosion between the switches. 

According to a General Motors report, a major cause of this problem starts from owning a heavy key ring. It can put stress on the contact point, resulting in ignition failures.

There are multiple ignition related problems apart from the ones mentioned above. They are:

  • Steering Wheel Binding
  • Worn Key or Ignition Cylinder
  • Ignition Switch Fault
  • Immobiliser Problems

Ignition Problems seen in various models

Ignition related problems are very common throughout the multiple models of Chevy SIlverado that they have to offer. Most of the problems are quite common while some of them vary. The problems are taken from various forums and are listed below alongside with the year model.

1985 Chevy Silverado Ignition Switch Problems: 

Ignition does not start even when the steering wheel is tilted. If it is turned on tho, it shows no signs of turning off even when the key is removed. The problem is seen to still retain after hot wiring.

1994 Chevy Silverado Ignition Switch Problems:

Key gets stuck in the forward position and does not turn back to off position.  Apart from this, jarring issues are also common.

1995 Chevy Silverado Ignition Switch Problems:

Jarring/ Jerking of the car is most prevalent in this model. Other issues that were mentioned were about wires being loose and battery cables being short.

2004, 2007 and 2011 Chevy Silverado Ignition Switch Problems:

Alongside the common issues, flickering of the warning lights is seen. Stalling of the car is seen while the car remains idle.

Here is a video enlisting all the common problems seen in the models from 1988 to 1998. 

What are the symptoms of Chevy Truck Ignition Switch Problems?

Problems regarding ignition switches develop overtime. One can identify the problems easily if they take in note of the symptoms mentioned below. They are:

  • Stalling/ Jerking of the Truck on the road
  • Constant dying of power after starting the engine
  • Engine not turning on at all
  • Lack of power to the other accessories i.e radio, GPS etc
  • Quick draining of battery life

How to fix Chevy Truck Ignition Switch Problems?

If you are reading this, it is safe to assume that your truck has already been diagnosed with ignition switch problems. Here, we will mention the ways to fix your ignition problems.

If you are facing issues with starting the truck:

If your truck is having trouble with starting or it is not starting at all, it is best to replace the ignition switch completely. Generally, these issues are quite major and need to be fixed as soon as possible.

We would advise you to visit the local garage and set an appointment with a professional to get your ignition problem fixed. Here’s a video link showing how the replacement is done.

If you are facing steering wheel binding:

If you are facing issues with the steering wheel, try to turn off the engine while the ignition is still on. Take out the key within that time frame. This will stop the problems for the time being.

What happens when the Chevy Truck Ignition Switch Goes out?

If the ignition switch goes out, you shall notice multiple things. Firstly, the engine won’t start at all. This is because the ignition is not able to send power to the engine. Therefore, it doesn’t start at all.

Secondly, all the other accessories will not receive any power. This includes the radio, A/C etc. Very often, flickering of the dashboard lights is observed. Lastly, the key might pop out when you try to turn the ignition cylinder.

How much does it cost to fix the Chevy Silverado Ignition Switch?

The cost can vary with problems, both quantity and quality wise. When you visit a local garage to fix your issues, you need to account for two types of costs, mechanical/ labor cost and parts cost.

Mechanical Cost:

Usually this cost varies from person to person. One garage can charge less from you, while another one can charge a hefty amount. Generally, the average mechanical cost lies within the range of 50 to 200 dollars.

Parts Cost:

The cost of an ignition switch varies with model and with time. On an average, a new ignition switch can cost you from anywhere between 60 to 350 dollars. You can also get your hand on a second-hand ignition switch for cheap prices too, such as 30 dollars.


Aside from all the detailed analysis, people have some common questions. Here are some of them alongside their answers.

Can you bypass the ignition switch?

Yes, we can. One would first need to remove the cover from under the steering wheel to access the wires.

After that, one would have to identify the wires and cut them with a knife. Finally, one would have to wire them one by one until they hear the engine sound.

Does a new ignition switch require a new key? 

Yes. Each ignition switch is programmed with a transposed code which is unique to every truck. The engine will only start if the chip in the key sends a signal which matches with the transposed code programmed in the car.

Will a car start with a bad ignition switch?

Sometimes. In some cases, the faulty ignition switch will allow the vehicle to start. However, this is very dangerous as the ignition switch can stop anytime while the car is running. This can lead to serious casualties, both to the driver and truck.


After reading this whole article, you must come to recognize the importance of an ignition switch. An ignition switch helps to kick start the car. Therefore, it is essential that the driver follows it.

Throughout the whole guide, we have shown you the ins and outs of the ignition switch problems that one can face in a Chevy truck. We would suggest you make regular maintenance checks to find out if your ignition switch is faulty or not.

It was my pleasure in explaining to you about the problems regarding ignition switches. By now, you shall have a concrete idea on how to fix the issue and can take action against them. we hope that you have a wonderful day!

Related Posts:

Similar Posts

Leave a Reply

Your email address will not be published.